HPA-Faip M 824 LL Uso Y Mantenimiento página 35

Ambient conditions for machine
transport and storage
Temperature: range from -25° ÷ +55°C.
WARNING
Do not stack other goods on top of the
packing to avoid damaging it.
Handling
To move the packed machine insert the
forks of a fork-lift truck in the channels at
the base of the pallet (fig.1).
Before moving the machine, refer to the
HOISTING AND HANDLING chapter.
WARNING
Keep the original packaging materials
so that the machine can be safely shi-
pped at a later date if necessary.
Operator's manual M 824 LL
UNPACKING /
ASSEMBLY
WARNING
Take the utmost care when unpacking,
assembling, hoisting and installing the
machine as described below.
Failure to observe these instructions
can damage the machine and compro-
mise the operator's safety.
- Remove the upper part of the packing
and make sure that the machine has not
suffered damage in transit; identify the
points at which the machine is anchored
to the pallet.
- The machine comprises five main units
(fig.1):
1 head
2 column guard
3 box with pressure gauge
4 air tank (TI version only)
5 body
6 LL head control valve
handle support (1, Fig. 2a)
- After removing the tower 1, it is advisable to
place it in a horizontal position to prevent it
from falling and getting damaged.
EN
1
35