HPA-Faip M 824 LL Uso Y Mantenimiento página 50

NB: With tyres with soft walls, the lever
supplied may also have to be inserted to
facilitate demounting (fig. 20).
WARNING
Grip the lever firmly when using.
- Lift the second bead manually over the
head, then turn the turntable clockwise
until the tyre has been completely de-
mounted from the rim.
- Tilt the tower backwards.
NOTES: for tyres with an air chamber,
after disassembling the upper bead, tilt
the column backwards and remove the air
chamber before continuing to disassemble
the lower bead.
The rotation of the table top can be stopped
at any time by releasing the pedal.
To rotate in the opposite direction, simply
raise up the pedal.
Mounting
WARNING
Always check that the tyre size is
compatible with the rim size before
mounting.
- Before you start with tyre mounting op-
erations, lubricate the beads (fig.21).
Lubricated beads require less force to
mount/seat and are protected against
torsional damage.
50
20
- Check that the tyre is in good condition
with no signs of damage.
- Place the tyre over the wheel and tilt the
tower forward.
- Place the lower bead (fig.22) under the
right hand part of the head.
- Press the turntable control pedal to ro-
tate clockwise and mount the bead.
- Taking advantage of the drop centre,
press on the right hand tyre wall head to
reduce tension on the bead as the wheel
rotates (fig.22).
Operator's manual M 824 LL
21
22