HPA-Faip M 824 LL Uso Y Mantenimiento página 52

- Push the pneumatic control lever up (Fig.
27) to lift the bead over the demounting
head.
- Press the turntable drive pedal, making
the wheel turn clockwise. The upper
bead will be automatically guided up and
over the rim edge (Fig.28).
- Lift the second bead manually over the
head (Fig. 29), then turn the turntable
clockwise until the tyre has been com-
pletely demounted from the rim.
- Tilt the tower backwards.
NOTE: When working with wide wheels
(13" - 14"), the SP2000 disc must be
used to lift the second bead onto the
mounting/demounting tool (Fig. 30)
52
26
Operator's manual M 824 LL
27
28