HPA-Faip M 824 LL Uso Y Mantenimiento página 41

Swinging arm (8-11100181)
Arm with bead lifting disc (8-11100183)
BSR Bridgestone wheels device
(8-11100182)
RUN FLAT device (8-11100194)
OVERALL
DIMENSIONS
A
880 - 1110
D
1120 - 1380
E
1320
1880
Operator's manual M 824 LL
B
C
INTENDED
OPERATING
CONDITIONS
This tyre changer has been designed
exclusively for mounting and demounting
tyres, using the tools with which they are
equipped as described in this manual.
WARNING
D
Any use other than those described in
this manual is to be considered impro-
per and unreasonable.
The machine is equipped with an inflation
system independent of all the other func-
tions described above.
Use the machine inflation system with
extreme caution (read the INFLATION
section).
Figure 7 shows the operator's positions
during the various work phases:
A Bead breaking
B Tyre demounting and mounting
C Inflation area.
E
C
C
WARNING
Column tilting must be performed
from work position C (fig.7), keeping
the hands away from moving machine
parts.
A
EN
B
7
41