HPA-Faip M 824 LL Uso Y Mantenimiento página 37

2 1
HOISTING/
HANDLING
In order to remove the machine from the
pallet, hook it as shown in fig.3.
This hoisting point must be used when-
ever you need to change the installation
Operator's manual M 824 LL
3
2a
3
position of the machine. Do not attempt
to move the machine until it has been
disconnected from the electricity and
compressed air supply systems.
INSTALLATION
CLEARANCES
WARNING
The regulations in force concerning
safety at work must be complied
with when choosing the installation
position.
IMPORTANT: for the correct and safe
operation of the machine, the lighting
level in the place of use should be at
least 300 lux.
WARNING
If the machine is installed outdoors, it
must be properly sheltered under a roof.
Install the tyre changer in the chosen work
position, complying with the minimum
clearances shown in fig.4.
EN
4
37