Dacor Pro DOP30 840 Serie Manual De Instrucciones página 80

Care and maintenance - Cooktop
Burner head and cap replacement
Dual Burner head / caps
Round Burner head / caps
80 English
DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 80 DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 80
1. Orient the burner head so the electrode
opening aligns with the electrode itself.
2. Install the burner head so the electrode
passes through its opening in the head.
Verify that the burner head lies flat on
the cooktop.
3. Match the burner caps to the burners
by size, and then re-install the caps on
the burner heads.
CAUTION
Each cap fits on a specific burner head.
Verify that each cap is installed and lies
flat on the correct head.
1. Put the burner heads on the burner
bases. The bottom of the head fits
inside the top of the burner base.
2. Turn the head until it drops in place,
then wiggle it to ensure it is seated
properly.
3. Place the burner caps on the burner
rings. The ridge on the bottom of each
cap fits around the top of the ring.
CAUTION
Verify that all burner parts are properly
seated.
2023-01-12 오후 2:41:21 2023-01-12 오후 2:41:21