DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 93
DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 93
5. Open the door fully. If the oven door
does not open to a full 90 °, repeat
steps 1 through 4.
6. At the bottom corners of the door,
flip the hinge locks forward to lock
them. See Step 3 (illustration A) in the
"Removing the oven doors" section for
the proper locked position.
7. Close the oven door.
NOTE
When the hinges are properly installed
and the door is closed, there should be
an even gap between the door and the
control panel. If one side of the oven door
is hanging lower than the other, the hinge
on that side is not properly installed.
English 93
2023-01-12 오후 2:41:25
2023-01-12 오후 2:41:25