Using the oven
How to run a self cleaning cycle
Set Clean Time
3hr
NOTE
• You will not be able to start a self-cleaning cycle if the control lockout feature is
activated or if the oven's temperature is too hot.
• The oven doors lock automatically. The display will show the remaining cleaning time.
You cannot open the oven doors until the temperature drops to a safe/cool temperature.
• You should not operate cooktop burners during self-cleaning mode.
62
English
DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 62
DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 62
1. Make sure the oven door is unlocked and closed
completely.
2. Turn the mode and temperature selector knobs to
the Off position.
3. Turn the mode selector knob from Off to the Self
Clean position.
4. Set the self cleaning time. 3 hr is the default. Press
<, > to select another time set. Press OK to start Self
Cleaning.
5. The oven door is locked and the oven begins to
heat up. When the cycle is complete, an alert beep
sounds. The door will remain locked until the oven
temperature falls below 400 °F (205 °C).
6. When the Self-Cleaning cycle is complete, turn the
mode selector knob to the Off position.
2023-01-12 오후 2:41:18
2023-01-12 오후 2:41:18