Descargar Imprimir esta página

Tornado VORTEX 18 MULTIWASH Manual De Operaciones Y Mantenimiento página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING
7.
Turn machine on its side and wipe
clean the rubberized drum and
machine body with clean, damp cloth.
8.
Re-install the brushes after
washing. It is easier to push the
brush shaft in from the right-
hand side of the machine (side of
electrical cable and foot pedal).
9.
The purpose of the small multi-
colored plastic plugs is to provide
a method of brush identification
to be used in different areas.
Additionally, this helps the operator
easily identify the brushes in order
to avoid cross contamination.
Transport:
Take extreme care when moving the machine up or down steps or stairs.
Incorrect lifting techniques may result in personal injury.
As stated earlier in this manual, this machine is heavy. Do not attempt to lift the
machine without assistance.
Carefully wrap the power cord and store in a dry, indoor location.
DO NOT expose the machine to rain or moisture.
When transporting the machine, ensure that all components, tanks and removable
parts are securely fastened and that the power cord and plug are not trailing.
DO NOT lift or transport the machine while it contains liquid as this will add
considerable weight to the unit.
When transporting the machine, the handle should be locked in the upright position.
Storage:
Always store the machine with the handle in the vertical position which will turn the
machine OFF.
Wrap the power cord around the power cord wrap hooks ensuring that the plug is
not trailing on the floor.
Always unplug, empty, wipe down and dry the machine after use.
Both the solution and recovery tanks should be emptied and flushed out with clean
water to ensure the seals and pumps are free from any cleaning detergents.
22
TRANSPORT AND STORAGE
Store machine in a dry indoor area only.
23

Publicidad

loading

Este manual también es adecuado para:

Ts050-w18-u