Stihl AHK 800 Manual De Instrucciones página 23

7 Attaching and Removing the Ridger
► Loosen screws (3).
► Detach retaining pin (4) and remove pin (5).
Blade spur (2) can be removed.
► Insert ridger (6) into adapter (7) from below so the bores
align.
► Insert pin (5).
► Push retaining pin (4) through the bore in pin (5).
The ridger is secured.
0478-906-9911-A
7.2 Removing the Ridger
WARNING
The tiller may tip over or move when removing the ridger.
This may result in injury to people and damage to property.
► Always work in pairs when removing the ridger.
► Stop the engine.
► Place the tiller on a level surface.
► Have a second person lift and hold tiller (1) so ridger (2)
can be removed.
► Loosen screws (3).
English
21