Approved Kombiengines; Mounting The Kombitool - Stihl HL-KM Manual De Instrucciones

Swing the cutter bar in an arc towards
the outside of the hedge so that the
cuttings are swept to the ground.
Recommendation: Only cut hedges that
are no more than chest height.
HL-KM

Approved KombiEngines

KombiMotors
Only use KombiMotors supplied or
explicitly approved by STIHL for use with
the attachment.
This Kombi attachment may be operated
only in combination with the following
KombiMotors:
STIHL KM 56 R, KM 85 R, KM 91 R,
KM 94 R, KM 111 R, KM 131 R

Mounting the KombiTool

2
1
Push the lug (1) on the drive tube
N
into the slot (2) in the coupling
sleeve as far as stop.
3
4
When correctly installed, the red line (3)
(arrow point) must be flush with the end
of the coupling sleeve.
Tighten down the star knob (4)
N
firmly.
Removing the KombiTool
Reverse the above sequence to
N
remove the drive tube.
English
11