Approved Kombiengines; Assembling The Unit - Stihl FCB-KM Manual De Instrucciones

1
: Always walk forwards when cutting,
do not pull the unit towards you.
: Edge at a steady pace to avoid
having to make several passes.
1 = Gunning sight for edger blade
FCB-KM

Approved KombiEngines

Only use KombiEngines supplied by
STIHL or expressly approved by STIHL
for use with the KombiTool.
The KombiTools may be operated in
combination with the following
KombiEngines:
STIHL KM 55, KM 85, KM 90, KM 110,
KM 130
Loop-handled models must be
equipped with a barrier bar.
The KombiTool may also be mounted to
STIHL brushcutters with a split boom
(T models).
Operation of this KombiTool is therefore
also permitted on the following power
tool models:
STIHL FS 55 T, FS 83 T and FS 85 T
Refer to power tool instruction
manual for use of the barrier bar.
English / USA

Assembling the Unit

: Pull the protective caps off the ends
of the drive tube and keep them in a
safe place.
The plug may come out of the drive
tube when you pull off the cap. Push
the plug back into the drive tube as
far as stop.
13