Approved Kombiengines; Assembling The Unit - Stihl FCS-KM Manual De Instrucciones

Always walk forwards when cutting,
N
do not pull the unit towards you.
Cut at a steady pace to avoid having
N
to make several passes.
1
Use the gunning sight (1) to line the
N
blade up with the edge of the bed.
FCS-KM

Approved KombiEngines

KombiEngines
Only KombiEngines supplied by STIHL
or expressly approved by STIHL for use
with the specific model are authorized.
Only use this KombiTool with the
following KombiEngines:
STIHL KM 55 R, KM 56 R, KM 85 R,
KM 90 R, KM 94 R, KM 110 R,
KM 130 R
WARNING
For machines with a loop handle, the clip
(barrier bar) must be installed.

Assembling the Unit

Pull the protective caps off the ends
N
of the drive tube and keep them in a
safe place for later use – see
"Storing the Machine".
NOTICE
The plug may come out of the drive tube
when you pull off the cap. Push it back
into the drive tube as far as stop.
English
11