Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
Thank you for purchasing this Triton product. This manual contains information necessary for
safe and effective operation of this product. This product has unique features and, even if you
are familiar with similar products, it is necessary to read this manual carefully to ensure you
fully understand the instructions. Ensure all users of the product read and fully understand
this manual. Keep these instructions with the product for future reference.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
DO NOT use in rain or damp environments!
WARNING: Moving parts can cause crush and cut injuries.
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your local authority or retailer for recycling
advice.
Conforms to relevant legislation and safety standards
Caution!
Be aware of kickback!
EN
8
Original Instructions
Technical Abbreviations Key
V
~, a.c.
A, mA
n
0
n
°
Ø
Hz
W, kW
/min or min
rpm
dB(A)
m/s
2
Specification
Model no:
Voltage:
Power:
No load speed:
7 speed setting (1 – 7):
Collets:
Max cutter diameter:
Max cutter shank:
Plunge adjustment:
Plunge range:
Dust extraction port dimensions:
Cord length:
Volts
Alternating current
Ampere, milli-Amp
No load speed
Rated speed
Degrees
Diameter
Hertz
Watt, kilowatt
Operations per minute
-1
Revolutions per minute
Decibel sound level (A weighted)
Metres per second squared (vibration magnitude)
TRA002 / TRA002BARE / TRA002TXLKIT /
TRA002TXXLKIT
220-240V~ 50/60Hz
2400W
8000 – 21,000min
1) 8000rpm
2) 10,400rpm
3) 13,000rpm
4) 15,800rpm
5) 18,000rpm
6) 19,500rpm
7) 21,000rpm
1/2" & 12mm
- 45mm with Guide Bush Mounting Plate
attached
- 50mm when used with TWX7RT001 without
Guide Bush Mounting Plate attached
- 55mm without Guide Bush Mounting
Plate attached
- 70mm max. diameter in suitable 3rd party
router tables, without Guide Bush Mounting
Plate attached
1/2"
1) Free plunge
2) Table height winder
3) Micro winder
0 – 68mm
Inner: 26.7mm
Outer: 32.8mm
3m
-1
Publicidad
