Össur TOTAL KNEE 2000 Instrucciones De Uso página 12

If the device is subjected to excessive moisture or a corrosive
environment, it is recommended to clean and lubricate the device
frequently.
In a slightly flexed position, three sets of roller bearings will be visible
(Fig. 10A). Place few drops of general purpose oil or sewing machine oil
on the roller bearings. Move the knee several times and wipe off excess
oil with a soft cloth. No other parts need external lubrication.
Wipe the device with a soft cloth moistened with small amount of
general purpose oil or sewing machine oil.
Caution: Do not use compressed air to clean device. Air forces pollutants
into bearings and may cause malfunctions and wear.
Caution: Do not use talcum powder for lubrication.
SUPPLEMENTARY DEVICES
Cosmetic Options (Fig. 11,12)
The device is intended to protect the prosthesis and to restore the
appearance of a missing limb.
• A discontinuous cosmetic solution that does not interfere with knee
function is recommended.
• Continuous cosmetic solutions are also a possibility.
Following cosmetic solutions are available, please refer to Össur
catalogue for further information:
Total Knee 2000
• Knee Cap, Small, Black (11A),
• Knee Cap, Large, Beige (11B),
• Shin Fairing, Black (11C),
• Cosmetic Foam Cover, Regular (12A), and
• Cosmetic Foam Cover, Large (12B).
Total Knee 2100
• Knee Cap, Small, Black (11D),
• Knee Cap, Large, Beige (11E),
• Shin Fairing, Black (11F), and
• Cosmetic Foam Cover, High Activity, Large (12C).
REPORT OF SERIOUS INCIDENT
Any serious incident in relation to the device must be reported to the
manufacturer and relevant authorities.
DISPOSAL
The device and packaging must be disposed of in accordance with
respective local or national environmental regulations.
LIABILITY
Össur does not assume liability for the following:
• Device not maintained as instructed by the instructions for use.
• Device assembled with components from other manufacturers.
• Device used outside of recommended use condition, application, or
environment.
12