Publicidad
Idiomas disponibles
Idiomas disponibles
5.1-channel speaker system with Bi-Amplifier connection
When the front speakers are Bi-wire speakers, which are equipped with separate terminals
for high-frequency sounds (tweeter) and low-frequency sounds (woofer), you can make
the bi-amplifier connection. Connect each pair of terminals for tweeter and woofer to the
SPEAKERS FRONT A terminals and SPEAKERS SURROUND BACK/HEIGHT terminals of this receiver.
You can enjoy higher quality sound playback if you operate the tweeter and woofer using
separate amplifiers.
30˚
100˚ – 120˚
Surround speakers
Center speaker
Front speaker
Subwoofer
Monaural audio cable (not supplied)
Speaker cable (not supplied)
Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers to avoid
receiver malfunction.
After you have made the connection, set [Surround Back Speaker Assign] in [Manual Speaker Settings] under
[Speaker Settings] to [BI-AMP].
24
EN
Publicidad
