Publicidad
Idiomas disponibles
Idiomas disponibles
Listening with
BLUETOOTH headphones/
speakers
1
Press HOME.
The home menu is displayed on the TV
screen.
2
Select [Setup] –
[Bluetooth Settings] –
[Bluetooth Mode], and then set
to [Transmitter].
3
Turn on the headphones/
speakers and set them to
pairing mode.
4
Select the name of the
headphones or speakers from
[Device List] in
[Bluetooth Settings].
If you cannot find your device name in
the list, select [Scan].
After "CONNECTING" flashes and the
headphone name or speaker name is
displayed on the display panel, pairing is
complete.
CONNECTING
XXXXXX
* "XXXXXX" represents the name of a
detected BLUETOOTH device.
5
Press one of the input buttons
to select the input you want.
The sound is output from the
BLUETOOTH headphones/speakers. No
sound is output from the receiver.
6
Adjust the volume of the
BLUETOOTH headphones/
speakers.
Volume control on the receiver and
remote control only works for the
BLUETOOTH headphones/speakers.
Note
• The BLUETOOTH device will be reconnected when
[Bluetooth Mode] is changed from [Receiver] to
[Transmitter]. Press BLUETOOTH TX/RX on the
remote control to reconnect quickly.
• You can also press BLUETOOTH TX/RX on the
remote control to switch [Bluetooth Mode].
However, you cannot switch [Bluetooth Mode]
when "NOT. USE" appears on the display panel.
Check if you are already using the Bluetooth
function.
• When a headphone is connected to the PHONES
jack, BLUETOOTH headphones/speakers cannot
be connected.
*
51
EN
Publicidad
