Publicidad
Idiomas disponibles
Idiomas disponibles
When your TV has the S-CENTER SPEAKER IN jack
When the receiver is connected to the S-CENTER SPEAKER IN jack of your TV, you can output the
center part of the receiver sound from the TV speakers. By using this connection, TV audio such
as dialogue can be made to sound as if it is coming out of the TV screen. (Acoustic Center Sync
function)
To use this function, you need to connect your TV to the HDMI OUT A (TV) jack of the receiver.
Also, set [TV Center Speaker] to [Use TV as Center] in Auto Calibration.
Stereo 3-pole mini plug audio cable (not supplied)
Note
• When [Sound Field] is set to [2ch Stereo], the sound will not be output through the TV speaker.
• Depending on the sound source, the sound may not be output through the TV speaker.
• When a BLUETOOTH device is connected and [Bluetooth Mode] is set to [Transmitter], or a headphone is
connected, the sound will not be output through the TV speaker.
Tip
• Some Sony TVs have an S-CENTER SPEAKER IN jack. For details, see the operating instructions of your TV.
• If you connect your TV to the S-CENTER OUT jack of the receiver, press HOME, select [Setup] –
[Speaker Settings] – [TV/Screen Center Settings] – [TV Center Speaker Mode] and then set to [On].
30
EN
Publicidad
