Publicidad
Idiomas disponibles
Idiomas disponibles
Additional Information
Saving power
You can save power by setting up the receiver
as follows:
– Set [Standby Through] to [Off] in the
[HDMI Settings] menu.
– Set [Network/Bluetooth Standby] in the
[System Settings] menu to [Off].
– Set [Power] for [Zone2] or [Zone3] in the
[Zone Controls] menu to [Off].
Note
If you agree to use the Chromecast built-in function,
[Network/Bluetooth Standby] automatically
switches to [On].
Reverting to the factory
default settings
If the receiver still does not operate properly,
reset the receiver as follows.
1
Press HOME.
The home menu is displayed on the TV
screen.
2
Select [Setup] - [Resetting].
3
Select [All Settings].
4
Select [Start].
To cancel resetting
Select [Cancel] in step 4.
If you cannot perform resetting
using the home menu
1
Press and hold (power) on
the receiver for more than 10
seconds.
The settings return to their initial status.
Note
• It takes a few minutes for the memory to be
cleared completely. Do not turn the receiver off
until "RESET" appears on the display panel.
• By resetting, the link with the wireless rear
speakers/subwoofer (not supplied) may be lost.
In this case, reconnect them by referring to their
operating instructions.
53
EN
Publicidad
