Honda ANF125 2010 Manual Del Propietário página 33

Adjust by turning the rear brake adjusting
nut a half-turn at a time. Make sure the cut-
out on the adjusting nut is seated on the
brake arm pin ( ) after making final 3
freeplay adjustment.
4. Apply the brake several times and check
for free wheel rotation after the brake
pedal is released.
If proper adjustment cannot be obtained by
this method, see your Honda dealer.
After adjustment, push the brake arm ( )
to confirm that there is a gap between the
rear brake adjusting nut ( ) and the brake
3
arm pin ( ).
After adjustment, confirm the freeplay of
the brake pedal.
4
2
http://mototh.com
(2)
(2) Rear brake adjusting nut
(3) Brake arm pin
(4) Brake arm
Other Checks:
Make sure the brake rod, brake arm, spring
and fasteners are in good condition.
(4)
(3)
23