3.
Rotate the rear wheel. Stop. Check the
drive chain slack. Repeat this procedure
several times. Drive chain slack should
remain constant. If the chain is slack only
in certain sections, some links are kinked
and binding. Binding and kinking can
frequently be eliminated by lubrication.
4. Except GR type
〈
Remove the chain covers ( ) by
removing the bolts A ( ) and bolt B ( ).
(3) Chain covers
(4) Bolts A
(5) Bolt B
http://mototh.com
〉
4
(5)
(4)
3
5
(3)
81