TOHATSU EvenRun MX 25H Manual Del Propietário página 43

42
INSPECTION AND MAINTENANCE
1
Remove the oil plugs (upper and lower),
and completely drain the gear oil into a
pan.
2 Insert the oil tube nozzle into the lower
oil plug hole, and fill with gear oil by
squeezing the oil tube until oil flows out
of the upper plug hole.
Do not reuse oil plug gasket. Always use
new gasket and tighten oil plug properly to
prevent entry of water into lower unit.
9
CAUTION
3
Install the upper oil plug, and then
remove oil tube nozzle and install the
lower oil plug.
Note
If water in the oil, giving it a milky colored
appearance. Contact your dealer.
Note
Use genuine gear oil or the recommended
one (API GL-5: SAE #80 to #90).
Required volume
: approx. 280mL (0.07 U.S. sal.)