Sartorius Maxicaps MR Instrucciones De Manejo Originales página 18

Installation
1
18 Maxicaps MR Operating Instructions
®
4 Installation
4.1 Selecting an Installation Site
Procedure
Ensure that the installation conditions have been met:
t
Condition
Ambient conditions
Setup surface
4.2 Unpacking
4.2.1 Unpacking Trolley and Handles
Requirements
Activate the two parking brakes on the castors.
Procedure
Remove the transport packaging.
t
Dispose of the transport packaging in accordance with local government
t
regulations.
4.2.2 Unpacking the Maxicaps
Personnel: 2 people (operators)
Procedure
Position the box so that the arrows (1) on the box are pointing upwards.
t
Open the box upwards.
t
Remove the cardboard protection.
t
Features
Suitability tested (see Chapter 12.4, page 44)
— Stable and even
— Low-vibration
— Sufficient space for the system (for device
space requirements, see Chapter 12.2,
page 43)
— Sufficient weight bearing capacity for the
system, including at full capacity (see
Chapter 12.1, page 42)
MR Filter Unit
®