Sartorius Maxicaps MR Instrucciones De Manejo Originales página 21

5 Process Preparation
5.1 Mounting Maxicaps
Mounting is shown here using a filter element with nine filter units (MR9) as
an example.
5.1.1 Mounting Handles on the Filter Unit
Depending on the configuration of the filter unit (MR2 - MR9), the handles
must be attached to various positions on the filter unit. Colored marking on
the handles and on the filter unit show the correct position.
1
Fig. 8: Filter unit color marking - Top view
Pos. Name
1 Filter unit color mark-
ing
Personnel: 2 people (operators)
Requirements
The filter unit is unpacked.
Process Preparation
MR
®
Description
— Shows the correct position for
mounting the handles.
— The color markings on the handles
must match the color markings on
the filter unit.
Maxicaps MR Operating Instructions
®
1
21