Sartorius Maxicaps MR Instrucciones De Manejo Originales página 29

To set the system rail to a suitable height:
t
1
Loosen the wing nut (2) on the system rail extension.
t
Push the system rail extension (1) up using the handle (3).
t
Once you have reached the desired position, tighten the wing nut (2).
t
Check that there are no kinks in the venting tubing set and that it has no
t
slack.
If required: Correct the height of the system rail.
t
2
3
Process Preparation
Maxicaps MR Operating Instructions
®
29