Mounting To A Round Cylinder - Balluff BMP 01-EL1PP 1A 00-P S75 Serie Manual De Instrucciones

BMP 01- EL1PP _ 1A- _ _ _ _ -00 -P _ _ /P _ _ -S4/P _ _ -S75
Magnetic Field Positioning System
4
Installation and connection (continued)
4.2

Mounting to a round cylinder

Hose clamps and round cylinder holders are used to
mount to a round cylinder (see accessories on page 30).
1. Clamp round cylinder holder to the BMP. When doing
so, be aware of the orientation of the holder (see
Fig. 4-8).
Round cylinder holder
BMP
Round cylinder
Fig. 4-8: Attaching holder to the BMP
2. Slide hose clamps over the BMP and the holders.
Hose clamp
Fig. 4-9: Applying hose clamps
3. Tighten screws of the hose clamps in order to secure
the BMP to the round cylinder.
Fig. 4-10: Securing hose clamps
www.balluff.com english 11