Startup; Starting Up The System; Operating Notes - Balluff BMP 01-EL1PP 1A 00-P S75 Serie Manual De Instrucciones

BMP 01-EL1PP _ 1A- _ _ _ _ -00 -P _ _ /P _ _ -S4/P _ _ -S75
Magnetic Field Positioning System
5

Startup

5.1

Starting up the system

Uncontrolled system movement
When starting up, if the positioning system is part of a
control system whose parameters have not yet been set,
the system may perform uncontrolled movements. This
could result in personal injury and equipment damage.
► Persons must keep away from the system's
hazardous zones.
► Startup must be performed only by trained technical
personnel.
► Observe the safety instructions of the equipment or
system manufacturer.
1. Check connections for tightness and correct polarity.
Replace damaged connections.
2. Turn on the system.
3. Check measurement values and adjustable parameters
and readjust the BMP if necessary.
Check for the correct values, especially after
replacing the BMP or after repair by the
manufacturer.
5.2

Operating notes

– Regularly check the function of the BMP and all
associated components.
– Take the BMP out of operation whenever there is a
malfunction.
– Secure the system against unauthorized use.
– Check the attachment and retighten it if necessary.
14 english
DANGER