Construction And Function; Construction; Function - Balluff BMP 01-EL1PP 1A 00-P S75 Serie Manual De Instrucciones

BMP 01- EL1PP _ 1A- _ _ _ _ -00 -P _ _ /P _ _ -S4/P _ _ -S75
Magnetic Field Positioning System
3

Construction and function

BMP 01-...-S4
50
BMP 01-...-S75
40
BMP 01-...-cable
Marking of the measuring range
1)
Not included in scope of delivery
2)
3) Attachment position (see Fig. 4-13
on page 12)
Fig. 3-1: BMP Magnetic Field Positioning System 01-..., structure and function
3.1

Construction

Electrical connection: The electrical connection is made
via a cable with or without a connector (see type code on
page 31).
Housing: Aluminum housing with plastic closures.
Housing length: Measuring range + 10 mm.
Attachment: Holes are provided in the BMP for
attachment using M2 mounting screws or slot nuts (see
accessories on page 30).
Target: Defines the position to be measured.
Measuring range: For adapting the BMP to the
application optimally, the following measuring ranges are
available: 32/64/96/128/160/192/224/256 mm. The values
listed in the Technical data (see Sec. 8.1 on page 29)
are maintained for repeat accuracy and non-linearity.
Detection range: Range in which the BMP detects the
position of the target. It extends beyond the measuring
range by 4 mm on both sides.
The detection range which goes beyond the
measuring range is only output via the IO-Link
interface.
www.balluff.com
1)
Groove
Target 2)
Measuring range
2
Detection range
Housing length
3
3)
2
LED Button
3.2
The BMP is an intelligent magnetic field positioning system.
It is used primarily for the non-contact detection of the
piston stroke of pneumatic cylinders, grippers and slides
with axially magnetized permanent magnets. The BMP
ensures continuous, absolute position measurement at an
application-relevant level of measuring accuracy.
The analog output of the BMP is easy to evaluate and can
be switched between voltage and current. It also offers a
switching output that is easy to adjust.
Using the button and the three LEDs, the BMP can be
configured without addition auxiliary tools.
Over the IO-Link interface, the BMP offers additional
configuration options and state monitoring functions.
The functions of the BMP allow it to support simple format
change in different applications.
Sensing surface
Hole spacing

Function

1)
Groove
3)
english 7