Publicidad
Idiomas disponibles
Idiomas disponibles
en-us
Operating the appliance
Operating the appliance
1
S witching on the appliance
O p e r a t i n g t h e a p p l i a n c e
1.
Press # button.
The appliance begins to cool. Warning signal, flashing
temperature display on the freezer compartment and
lit button Ú indicate that the freezer compartment is
still too warm.
Press Ú button.
2.
The warning signal switches off.
3.
Set the required temperature.
~ "Setting the temperature" on page 14
Operating tips
When the appliance has been switched on, it may take
▯
several hours until the set temperatures have been
reached. Do not put in any food until the selected
temperature has been reached.
The fully automatic NoFrost system ensures that the
▯
freezer compartment remains frost-free.
Defrosting is not required.
The front sides of the housing are partly heated
▯
slightly. This prevents condensation in the area
of the door seal.
If the freezer compartment door cannot be
▯
immediately re-opened after it has been closed, wait
until the resulting low pressure has equalized.
Switching off and disconnecting the
appliance
Switching off the appliance
Press # button.
▯
The appliance is no longer cooling.
Disconnecting the appliance
If you do not use the appliance for a prolonged period:
Press # button.
1.
The appliance is no longer cooling.
2.
Pull out mains plug or switch off fuse.
3.
Clean the appliance.
4.
Leave appliance open.
14
Setting the temperature unit
You can choose between °C or °F as the unit of
temperature.
1.
Press and hold + button.
Every half a second, the value changes in the display.
After the display has cleared for half a second, F or C
is shown for 1 second:
F if you are switching from °C to °F,
C if you are switching from °F to °C.
2.
Release + button.
The unit has been changed.
Note: If you release the button before the end of the
program, the unit doesn't change.
Setting the temperature
Recommended temperature
Cooling compartment:
Freezer compartment:
Cooling compartment
Keep pressing the –/+ button until the display
▯
indicates the required temperature.
Cool-fresh compartment
The temperature in the cool-fresh compartment is kept at
around 32°F (0°C).
Note: If frost forms on the food items in the cool-fresh
compartment, set a higher temperature. ~ "Faults –
what to do?" on page 24
Freezer compartment
Keep pressing –/+ button until the display indicates
▯
the required temperature.
Fast cooling
Fast cooling cools the refrigerator compartment as cold
as possible.
Switch on fast cooling, e.g.:
Before placing large quantities of food into the
▯
compartment
▯
For cooling drinks quickly
Note: When fast cooling is switched on, increased
operating noises may occur.
After approx. 15 hours, the appliance switches to normal
operation.
+39 °F (+4 °C)
0 °F (–18 °C)
Publicidad
