Gaggenau RB282705 Instrucciones De Uso página 16

en-us
Home Connect
Home Connect
o
H o m e C o n n e c t
T his appliance is Wi-Fi-capable and can be controlled
remotely using a mobile device.
Note: Wi-Fi is a registered trade mark of the Wi-Fi
Alliance.
In the following cases, the appliance functions like a
refrigerator without a network connection and can still be
operated manually via the controls:
The appliance is not connected to a home network.
▯
▯ The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. Home Connect services are not
available in every country. You can find more
information on www.home-connect.com.
Note: Please observe the safety information in this
instruction manual. Ensure that this is also observed if
you operate the appliance via the Home Connect app and
are not at home when doing so.
~ "Important safety instructions" on page 3
Follow the instructions in the Home Connect app as well.
Setting up Home Connect
Notes
Take note of the Home Connect supplementary sheet,
▯
which is available for download at www.gaggenau.com
together with the instructions. To do so, enter the
E-number of your appliance in the search field.
After switching on the appliance, wait at least two
▯
minutes until the internal device initialization process
has been completed. Only then start setting up Home
Connect.
To be able to make settings with Home Connect, you
▯
need to install the Home Connect app on your end
device.
To do this, please take note of the documentation that
has also been supplied from Home Connect.
Follow the steps specified by the app to make the
settings.
▯ If the device is not operated for a prolonged period,
the Home Connect menu will close automatically. You
can find information on how to open the Home
Connect menu at the start of the appropriate chapter.
16
Automatic connection with the home network (WLAN)
If a WLAN router with WPS function is available, the
refrigerator can be automatically connected to the home
network.
1. Press · button.
The refrigerator compartment temperature display
shows Cn.
Press –/+ refrigerator compartment button until the
2.
refrigerator compartment temperature display
shows AC and the freezer compartment temperature
display shows OF.
Press –/+ freezer compartment button.
3.
The appliance is ready for automatic connection.
The freezer compartment temperature display shows
an animation for 2 minutes.
The appliance is ready for automatic connection for as
long as the animation is displayed.
4.
Within those 2 minutes activate the WPS function on
the home network router (e.g. using WPS/
WLAN button. Observe the information on this topic
in the router documentation).
If the connection is successful, On flashes up in the
freezer compartment temperature display.
The refrigerator is ready for connection with the app.
Note: If the freezer compartment temperature display
shows OF, no connection could be established.
1.
Check whether the refrigerator is located within the
range of the home network (WLAN).
2.
Repeat the process or establish the connection
manually.
Manual connection with the home network (WLAN)
If the existing WLAN router does not have a WPS
function of if this is unknown, you can connect the
refrigerator to the home network manually.
Press · button.
1.
The refrigerator compartment temperature display
shows Cn.
Press –/+ refrigerator compartment button until the
2.
refrigerator compartment temperature display
shows SA and the freezer compartment temperature
display shows OF.
Press –/+ freezer compartment button.
3.
The appliance is ready for manual connection.
The freezer compartment temperature display shows
an animation.
The appliance is ready for manual connection for as
long as the animation is displayed.