TensCare unifit Instrucciones De Uso página 32

Device Specification
Waveform
Amplitude (over 1 kOhm load)
Output
Max Pulse Energy
Output plug
Channels
Battery
Weight
Dimensions
Safety Classification
Software Version
Applied Part
Environmental Specifications
Operating Conditions
Storage Conditions
Note: The electrical specifications are nominal and subject to variation from the
listed values due to normal production tolerances of at least 5%.
Note: At least 30min required for the device to warm / cool from the minimum /
maximum storage temperature between uses until it is ready for intended use.
32
Symmetrical rectangular bi-phasic
99 mA zero to peak in 99 steps +/- 10%
Constant current 500-1000 Ohm
Constant voltage > 1000 Ohm
Total output limited to 25 μC per pulse
Fully shielded: touch proof
Dual channel
Built-in lithium-ion battery
Ratings: 1500mAh, 5.5Wh, 3.7V
128.5g
125 x 62 x 26mm
Internal power source
Designed for continuous use
No special moisture protection
R2_00
Skin surface electrode pads
Temperature range: 5 to 40°C
Humidity: 15 to 90% RH non-condensing
Atmospheric pressure: 700 hPa to 1060 hPa
Temperature range: -10-+60°C (≤ 1 month)
-10-+45°C (≤ 3 month)
-10-+28°C (≤ 1 year)
Humidity: 15 to 75% RH non-condensing
Atmospheric pressure: 700 hPa to 1060 hPa