Publicidad
Idiomas disponibles
Idiomas disponibles
Using the oven
Using the hood control feature
NOTE
This product features a Bluetooth device that you can use to connect the range to Dacor
hood control models. Through the Bluetooth connection, you can use the hood control
function on the SmartThings app.
To connect to a hood control model and a hood:
1. Download and run the SmartThings app on your smartphone. Then, complete the
Smart Control procedure to connect to the range. See page 68.
2. Follow the hood control model's Bluetooth instructions and activate the Bluetooth
connection.
3. Press the Bluetooth icon
on the hood's control panel. The Bluetooth icon LED
blinks.
4. Press the Settings button on the range display screen.
Press <, > to select Hood Connection. Tap OK to
connect to the hood.
5. When Bluetooth pairing is finished, the Bluetooth
icon LED stops blinking and glows steadily. Press the
Settings button to exit.
6. Follow the instructions in the user manual of the
hood control model and the App guide to use the
hood control.
74
English
DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 74-75
DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 74-75
Bluetooth on/off
Press the Bluetooth icon
on the hood's control panel.
NOTE
•
The Bluetooth icon LED on the hood is on when Bluetooth is enabled.
The Bluetooth icon LED on the hood is off when Bluetooth is not enabled.
•
If the Smart Control connection is not successful, you cannot use the SmartThings
app to monitor and control the hood.
Without a Smart Control connection to the range, you can use a Bluetooth
•
connection to pair the range with the hood and sync them. To do this, follow the
Bluetooth connection steps on page 74.
•
Bluetooth will not work properly if the Bluetooth connection is unstable.
•
See the SmartThings app manual for detailed information.
English
75
2023-01-17 오후 3:01:58
2023-01-17 오후 3:01:58
Publicidad
