Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Problem
Cause
The oven light
The oven door lock is
(lamp) will not
turned on.
turn on.
The Sabbath function has
been activated.
A loose or burned-out
bulb.
The switch operating the
oven light needs to be
replaced.
The oven smokes
Meat or food was not
excessively
properly prepared before
during broiling.
broiling.
Improperly positioned top
oven rack.
The controls are not being
set properly.
Greasy buildup on oven
surfaces.
Cooking is
The fan automatically runs
finished, but the
for a certain amount of
cooling fan is still
time to ventilate the inside
running.
of the oven.
100
English
DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 100-101
DOP30T940DS_DG68-01459A-00_EN+MES+CFR.indb 100-101
Action
The display will show the Lock icon.
Hold the oven door open, and then
tap and hold Settings for 3 seconds.
The oven will beep and the Lock icon
will turn off.
SAb and the time of day will show
in the display. All other controls and
signals will be deactivated. To cancel
the Sabbath function and reactivate
the light switch and other controls,
Tap and hold OK for 3 seconds.
See page 96.
Call for a qualified service technician.
Cut away excess fat and/or fatty
edges that may curl.
See the broiling guide on page 45.
See page 32.
Regular cleaning is necessary when
broiling frequently.
This is not a product malfunction.
The fan is designed to run
automatically for a period of time to
cool down the oven.
Problem
Cause
The oven will not
The oven door lock is
self-clean.
turned on.
The Smart Divider is
installed in the oven.
The oven is too hot.
The self-cleaning oven
controls are not properly
set.
A surface burner is on.
A crackling or
This is normal.
popping sound.
Excessive
This is the first time the
smoking during
oven has been cleaned.
a self-cleaning
cycle.
Action
The display will show the Lock icon.
Hold the oven door open, and then
tap Settings for 3 seconds. The oven
will beep and the Lock icon will turn
off.
Self-clean will not operate with the
Smart Divider installed. Remove it
from the oven.
Let the oven cool down, and then
reset the controls. The self-clean
cycle will not lock the oven door if
the oven temperature is too hot. The
door must lock before the self-clean
cycle can start.
Reset the self-cleaning oven controls.
(See page 60.)
Turn off the surface burner. Self-
clean will not operate if a surface
burner is on.
This is the sound of the metal
heating and cooling during any
cooking or cleaning function.
This is normal. The oven will always
smoke more the first time it is
cleaned.
Wipe up all excessive soil before
starting the self-cleaning cycle.
If smoke persists, Turn the burner
knob to Off. Open the windows to
clear the smoke from the room. After
the oven has cooled and unlocked,
wipe up excessive soil, and then
reset the oven for self-cleaning.
English
101
2023-01-17 오후 3:02:03
2023-01-17 오후 3:02:03
Publicidad
