Publicidad
Idiomas disponibles
Idiomas disponibles
Getting Started
Unpacking the Smoker
Remove and appropriately discard all packaging materials. Avoid using sharp tools that can damage the
contents. Remove all tape and protective films before first use.
Refer to the "Components" section of this manual to verify that all components are present.
Positioning the Smoker
Place the smoker on a level and stable surface indoors, such as a kitchen countertop.
The smoker should be positioned such that it has 4 inches of clearance to all sides of the appliance,
whenever possible. Position the smoker away from flammable materials and any items that may be
sensitive to heat.
Installing Components
Removable Rack Supports
The rack supports are assembled to the side of
the smoke chamber and support the wire racks
on which food is placed. The rack supports are
designed to be easily removed for cleaning
purposes and are dishwasher-safe.
NOTE: The rack supports are designed to be
symmetrical. Hence, it is not important which rack
is installed on the left or right side of the smoke
chamber.
To assemble the left rack support, align the two
notches in the bottom of the rack support with
the shoulder bolts mounted on the lower lefthand
side of the smoke chamber. Press the rack
support downward so the notches are seated
behind the head of the lower shoulder bolts.
Then align the notch in the top of the rack support
with the shoulder bolt mounted on the upper
lefthand side of the smoke chamber. Lightly bend
the wire down to allow the notch to seat behind
the head of the upper shoulder bolt. Repeat this
process for the righthand side.
Notches
14
49-9000057 Rev. 1
Publicidad
