ENGLISH
Even though the appliance is complete with
all safety devices, during the installation and
connection procedures it may be necessary to
supplement it with additional devices to com-
ply with the relevant applicable laws.
The position of the devices is shown in the pic-
ture.
Safety thermostat: cuts off the electricity
A)
supply in case of overheating.
The position of the signs provided is shown in
the picture.
Manufacturer and appliance nameplate.
A)
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance, do not point pressurised water jets at
internal parts.
WARNING: draws attention on com-
D)
pliance with the rules. "Install in compliance
with the applicable regulations and use in
well ventilated premises only".
WARNING: draws the attention on
E)
compliance with the rules. "The Manufac-
turer declines all liability in case of failure to
comply with the installation and commis-
sioning instructions".
WARNING: watch out for hot surfac-
F)
es.
4
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
A
A
A
E
D
F
37M3202
C
B
CE Marking: it indicates that the equipment
G)
is compliant with all relevant laws applicable
to the product.
WEEE symbol: it indicates that the appliance
H)
is subject to specifi c waste disposal regula-
tions.
SAFETY
G
A
H
3413910_ut_GB_rev.1