Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Hazard
Risk of electric
shock caused by live
components
Risk of electric
shock caused by live
parts
10
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and
on the adjacent metal
accessories
Countermeasures
• Prevent the appliance from
being powered acciden-
tally.
• Ensure that there is no
voltage
• Before commissioning the
appliance, check that all
electric connections are
not damaged
• Use a power supply cable
with the specifi cations
indicated in section "Elec-
trical connection" of the
installation manual.
• Before appliance com-
missioning, check that
electrical connections are
securely fi xed
• Before commission-
ing, make sure that the
appliance and its metal
accessories are connected
to a system for equipoten-
tial bonding
SAFETY
Safety device
• Protection
panels
• System
switch-dis-
connector
Equipoten-
tial bonding
system
3413910_ut_GB_rev.1
Publicidad
