Publicidad
Idiomas disponibles
Idiomas disponibles
3=
Connect the quick connector on the other end of the
10' (3.0 m) PVC flexible gas supply hose to the rigid Natural
gas supply pipe (B).
/
/
//
/
3=
Use a 6 mm socket and wrench or 6 mm nut driver to remove
the brass orifice from the end of gas valve. The main burner
orifice is located behind the LP orifice, so no additional orifice
needs to be installed.
A, Brass connector
B. Quick connector
B
Change Grill Main Burner Valve Orifices
1. Remove the grates and flame tamers.
2. Remove the 2 screws that hold the burner in place. Set the
screws aside. Remove the burner from the grill by lifting the
burner out.
A. Main burner orifice
4. Reinsert the burner and reattach using the 2 screws
previously removed. Repeat the procedure for each main
burner.
5. Position the igniters so they are 1¼,,(6.0 mm) away from each
burner.
Change the Rotisserie/Infrared
Burner Orifice
1. Using a Phillips screwdriver, unscrew the 2 screws and
remove the rotisserie/infrared
burner wind baffle.
A
A. 2 screws
A. Wind baffle
13
Publicidad
