Publicidad
Idiomas disponibles
Idiomas disponibles
2=
3=
Remove the access cover at the back of the grill by removing
the 4 screws at the back of firebox (2 on each side of the
rotisserie infrared burner).
-\\
\\\
\
A
A. Access cover
Using a Phillips screwdriver, remove the 2 screws holding the
spider guard to the burner.
5=
Take out the orifice support, and then use a 6 mm socket and
wrench or 6 mm nut driver to remove the LP orifice at the end
of the supply pipe. Replace with Natural gas orifice.
A
A. Orifice support
B. Orifice
6. Reinstall the spider guard, access cover, and wind baffle.
Change the Infrared Searing Main Burner Orifices
1. Remove the screw securing the infrared searing main burner
igniter and remove the igniter from the searing burner.
A
4=
I
\
A
A. 2 screws
Use 24 mm wrench to remove the orifice nut.
2=
A. Screw
Remove the infrared searing main burner cover screws. Set
the screws and cover aside.
A
A. Orifice nut
/
/
A. 2 screws
14
Publicidad
