Fig. 1: BWT THERO 90PRO - front side of the
device
Fig. 2: BWT THERO 90PRO - back side of the
device
1.2 Scope of delivery
3
The reverse osmosis device is supplied with
the following (Fig. 1 and Fig. 2):
1 RO cartridge
2 Device ON/OFF switch
3 Top service cover for blending valve (initi-
4 Bottom service cover for attaching/
5 Feed water connection 3/4"
1
6 Permeate connection 1/4"
7 Concentrate connection 1/4"
8 BWT tap with connection material
Optionally available:
RO replacement cartridge (item no. 812829)
1.3 Manufacturer's address
BWT water + more GmbH
Walter-Simmer-Straße 4
5310 Mondsee, Austria
4
Telephone: +43/6232/5011-0
Fax: +43/6232/4058
E-mail: warewashing@bwt-group.com
1.4 General information
This installation and operating manual (IOM)
contains important instructions for safe and
2
efficient use of the reverse osmosis device
BWT THERO 90PRO. This installation and op-
erating manual (IOM) is part of the device and
must be constantly available at the place of
7
operation for all staff members assigned.
1.4.1 Reading the installation and operating
The staff must have read and understood
6
this IOM prior to any work being carried out.
A basic precondition for safe working is the
5
adherence to all stated safety and operating
instructions.
In addition, the local accident prevention pro-
visions and the general safety provisions
8
effective at the place of operation are
applicable. The illustrations in these instruc-
tions are intended to provide a basic under-
standing and may deviate from the actual
design of the device. Justified claims cannot be
derived from the same.
al setting "0")
detaching the RO cartridge
manual (IOM)
EN
16