Publicidad
Idiomas disponibles
Idiomas disponibles
English
4. Check battery insertion
WARNING
If the battery is inserted while the power switch
is in the ON position, the power tool will start
operating immediately, inviting serious accident.
CAUTION
Until the battery locks in place with a little click,
if not, it may accidentally fall out of the tool
causing injury to you or someone around you.
5. Operation of switch
For safe operation of the machine, a "lock-off button"
is provided on the side of the handle.
If the trigger switch is pulled while the lock-off button
is pressed in the direction of either of the arrow
marks, the main switch can be turned ON.
After the switch is on, the saw blade will continue to
operate as long as you pull on the trigger switch, even
if you release the lock-off button.
Lock-off button
6. Check for proper operation of the brake
Please refer to "5. Check for proper operation of the
brake" in [PRIOR TO OPERATION] for details.
7. About the mode select function
Each time the mode selector switch is pushed, the
operation mode changes.
When Silent mode is selected, the Silent mode
indicator lamp lights up.
Silent mode reduces maximum motor RPM enabling
efficient work with less noise.
If the load increases while the motor is operating in
Silent mode, it automatically changes to Power mode.
Additionally, if the load decreases again, it
automatically returns to Silent mode.
In Power mode, no change is made to Silent mode
even when the load decreases.
20
Trigger switch
Fig. 23
Mode selector switch
Silent mode indicator lamp
Switch panel
Mode
Power
Silent
NOTE
○ The mode will only change after a battery is installed
and the switch is pulled once.
○ The current mode will be maintained even if the
switch is on/off, or the battery is removed/reinserted.
8. About Remaining Battery Indicator
Remaining battery power can be verified by pulling on
the switch to make the remaining battery indicator
lamp light up red. (See Table 5)
The indicator lamp will change to the lighting mode
indicator lamp (green) 10 seconds after the switch is
released.
Remaining battery Indicator lamp (red)
Switch panel
Fig. 24
No-load speed
4,200 /min
2,200 /min
Fig. 25
Publicidad
