Publicidad
Idiomas disponibles
Idiomas disponibles
Table 5: Indications of the battery remaining power
State of lamp
Battery Remaining Power
The battery remaining power is
enough.
The battery remaining power is
half.
The battery remaining power is
nearly empty.
Re-charge the battery soonest
possible.
As the remaining battery indicator shows somewhat
differently depending on ambient temperature and battery
characteristics, read it as a reference.
CAUTION
Do not give a strong shock to the switch panel or
break it. It may lead to a trouble.
NOTE
When using a battery with a remaining battery
indicator, please refer to the indicator lamp on the
battery for the battery remaining power.
9. Remaining battery indicator
You can check the battery's remaining capacity by
pressing the remaining battery indicator switch to light
the indicator lamp. (Table 6)
It is best to use the remaining battery indicator as a
guide since there are slight differences such as
ambient temperature and the condition of the battery.
Also, the remaining battery indicator may vary from
those equipped to a tool or charger.
Remaining battery
indicator lamp
Display panel
Remaining battery
indicator switch
Fig. 26
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than
25%.
Blinks ;
The battery remaining power is nearly
empty. Recharge the battery soonest
possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it
to fully cool down.
Blinks ;
Output suspended due to failure or
malfunction. The problem may be the battery
so please contact your dealer.
As the remaining battery indicator shows somewhat
differently depending on ambient temperature and battery
characteristics, read it as a reference.
CAUTION
Do not give a strong shock to the display panel
or break it. It may lead to a trouble.
10. How to use the LED light
By pressing the lighting mode switch on the switch
panel, the LED light mode changes as Table 7. It is
indicated by green lamp.
To prevent the battery power consumption, turn off
the LED light frequently.
English
Table 6
21
Publicidad
