Mobiclinic STEPPLUS Manual De Instrucciones página 10

ES EN FR IT
4. MEANING OF THE FUNCTIONS
Press the "set" button to select the desired function and hold it down for 3 seconds. This will set the
individual value for the functions to "0".
SCAN: Display different types of functional value automatically in order.
TIME: from 0 to 99:55.
CALORIE: Accumulate calorie consumption during exercise for baseline only, not for medical reference.
COUNT: Accumulate the number of steps the step per minute ratio.
MODE: You can choose several function keys if held for 3 seconds, the whole value will return to zero and
reset to calculate.
Any movement of the pedals will start the display. Press the mode button to choose four functions
(time/second, time, calories, auto scan). The small arrow on the display will show various functions
corresponding to the four arrows below the display.
AUTO SCAN: The display will automatically show 4 seconds separately times/seconds, time, calories under
this condition.
AUTO OFF: If there is no signal input for 4 seconds, the display will automatically turn off. But it will re-enter
signal by exercising or touching the mode button.
IMPORTANT
- If the display is not readable, please remove the batteries and reinstall them.
- Battery specification: 1 unit CR3032 3V.
- If the step counter does not work, you can carefully remove the counter and adjust the height of the
DE PT NL SWE PL DK
Steps machine
STEPPLUS
10