Publicidad
Idiomas disponibles
Idiomas disponibles
Safety devices
CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
Note
The safety functions of the device are not affected in the
absence of a network connection.
Emergency-off button
If the emergency off button is pressed, all cleaning and
driving functions are stopped immediately.
Safety switch
The device stops if both safety switches are released
during manual operation.
In autonomous operation, actuation of a safety switch
triggers an operating pause of 10 seconds.
Distance sensor
The distance sensors detect obstacles and cause the
device to circumnavigate the obstacles. The distance
sensors comply with laser protection class 1 according
to IEC 60825-1:2014.
Optical sensor
The optical sensors detect obstacles and cause the de-
vice to circumnavigate the obstacles. The optical sen-
sors comply with laser protection class 1 according to
IEC 60825-1:2014.
Docking station
This device is suitable for commercial and industrial
use, e.g. in hotels, schools, hospitals, factories, shops,
offices, and rental companies.
WARNING
Users must be adequately instructed in the use of the
docking station.
Use the docking station in dry areas only.
Unplug the docking station mains plug from the mains
socket before carrying out any maintenance work.
Prevent the mains cable of the docking station from
coming into contact with the rotating brushes of the floor
cleaner.
CAUTION
Use the docking station indoors only
Store the docking station indoors only.
Warning symbols
Observe the following warnings when handling the bat-
teries:
Observe notes in the instructions for the
battery, on the battery and in these oper-
ating instructions.
Wear eye protection.
Keep acids and batteries away from chil-
dren.
Risk of explosion
Fire, sparks, open flames and smoking
are prohibited.
Risk of acid burns
First aid.
Warning
Disposal
Do not throw batteries in the bin.
Unloading
1. Remove the cardboard box together with the wood-
en reinforcing timbers from the wooden base.
2. Remove the strap.
3. Unscrew the two blocks.
Wooden block
1
4. Unscrew the boards and the squared timber from
the wooden base.
Board
1
Beam
2
5. Use the unscrewed boards and the squared timber
to lay a ramp behind the wooden base.
Beam
1
Board
2
6. Fix the boards and the squared timber with the pre-
viously removed screws.
7. Pull the device backwards off the wooden base.
Charging the battery
The battery is automatically charged when operating
with a docking station.
Without docking station:
1. Open the door of the device compartment.
English
Charging cable
1
Device compartment door
2
a Pull out the charging cable.
b If the device does not have a charging cable, plug
a mains cable with an IEC plug into the mains
socket on the docking port.
Mains socket
1
Docking port
2
2. Plug the mains plug of the charging cable into a
mains socket.
The charging process begins automatically.
The charging state is displayed on the touch screen.
The device cannot be used during the charging pro-
cess.
The charging process takes about 8 hours when the
battery is fully discharged.
3. Unplug the mains plug from the socket after the
charging process has finished.
4. Stow the mains cable in the device compartment or
unplug the power cable from the docking port.
Downloading the operating
instructions
After startup, the operating instructions of the device
can be displayed on the touch screen. If the operating
instructions are also downloaded to a smartphone, the
operating steps can be read in parallel with the opera-
tion.
1. Scan the following code on the smartphone and fol-
low the instructions to download the operating in-
structions.
5
Publicidad
