CST/BERGER Theodolite DGT 10 Manual Original página 18

Safety Notes
Read and observe all instructions. The inte-
grated protections in the measuring tool may be
compromised if the measuring tool is not used in
accordance with the instructions provided.
SAVE THESE INSTRUCTIONS FOR FUTURE REF-
ERENCE.
 Have the measuring tool repaired only through qualified
specialists using original spare parts. This ensures that
the safety of the measuring tool is maintained.
 Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids, gas-
es or dusts. Sparks can be created in the measuring tool
which may ignite the dust or fumes.
Product Description and Specifications
Intended Use
The measuring tool is intended for precise measuring of hori-
zontal and vertical angles and distances.
Product Features
The numbering of the product features refers to the illustrations
on the graphics pages.
1 Levelling screw
2 Operating panel
3 Display
4 Adjustment screw for horizontal fine-adjustment
5 Set screw for horizontal coarse-adjustment
6 Objective lens
7 Optical peep sight
8 Tilt axis
9 Optical plummet
Technical Data
Theodolite
Article number
Telescope
Telescope
– Length
– Opening
– Magnification
Image indication
Field of view
Resolution
Shortest focusing distance
Stadia ratio
Stadia addition
Electronic Angle Measuring
Method
Indication accuracy
Measuring accuracy
Diameter
18 | English
10 Base plate
11 Thumbscrew for tribrach adjustment
12 Plate vial
13 Handle securing screw
14 Carrying handle
15 Battery compartment
16 Focussing ring for telescope
17 Eyepiece
18 Set screw for vertical coarse-adjustment
19 Adjustment screw for vertical fine-adjustment
20 On/Off button for display
21 Circular bubble vial
22 Latch of battery lid
23 Battery lid
24 Hook of battery compartment
25 Tribrach
26 Screw casing
27 Eyepiece for optical plummet
28 Focussing ring for optical plummet
29 Cover for adjusting screws
Accessories
Adjustment mandrel
Carrying case
Objective-lens cover
Tool kit
Rain cover
Plumb bob
Sun cover
Accessories shown or described are not part of the standard delivery
scope of the product. A complete overview of accessories can be
found in our accessories program.
DGT 10
F 034 K54 3N0
155 mm
45 mm
30 x
erect
1°30'
3.5''
1.3 m
100:1
0
absolute
5''/10'' (3/5 mgon)
5'' (1.5 mgon)
79 mm
DGT 2
F 034 K54 3N1
155 mm
45 mm
30 x
erect
1°30'
3.5''
1.3 m
100:1
0
absolute
5''/1'' (1/0,5 mgon)
2'' (0.5 mgon)
79 mm
1 609 92A 0LD • 23.10.14