CST/BERGER Theodolite DGT 10 Manual Original página 24

You can end the procedure at any time by pressing the SFT but-
ton.
Note: When the above-mentioned setting has been completed,
you should check the instrument again. Collimate the same tar-
get in the first and second positions. The sum of the vertical an-
gles should be within a range of 360° ± 15". If it is not within this
range, you should repeat the adjustment or follow the instruc-
tions in "Collimating the Instrument".
Maintenance and Service
Maintenance and Cleaning
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Take care not to scratch the lens during cleaning. Only use a soft
brush or a soft cloth.
Transport
 When storing or transporting, always switch the display
off.
Use the original case to protect the measuring tool during trans-
port.
As far as possible, do not transport the measuring tool when
mounted to a tripod.
Should this however be necessary, hold the measuring tool as
vertical as possible, carry it in front of yourself and never hori-
zontally over the shoulder.
After-sales Service and Application Service
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
24 | English
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-Mail: rbsa-hq.pts@za.bosch.com
Disposal
Measuring tools, accessories and packaging should be sorted
for environmental-friendly recycling.
Only for EC countries:
Do not dispose of measuring tools into house-
hold waste!
According to the European Guideline
2012/19/EU for Waste Electrical and Elec-
tronic Equipment and its implementation into
national right, measuring tools that are no
longer usable must be collected separately
and disposed of in an environmentally correct
manner.
1 609 92A 0LD • 23.10.14