CST/BERGER Theodolite DGT 10 Manual Original página 20

Functions of the Measuring Tool
Display Indications
Display Function
SD Sloping distance
HD Horizontal distance
VD Height difference
VA Value for vertical angles in % or gons
Horizontal circle, counting direction clockwise
Horizontal circle, counting direction anticlockwise
Slope correction
Repeat horizontal angle
Hold horizontal angle
Second function
Battery indication
% Angle indication in %
m Unit of length: m
gon Angle indication in gons
Date
Time
Automatic shutdown
20 | English
Function Buttons
– Switch the display on and press the respective button to se-
lect the desired option.
Button Function 1
Button for zeroing the
horizontal circle: Sets
the horizontal indication
to zero (press twice).
Hold button for the
measured value of the
horizontal circle: For
holding or releasing the
current horizontal circle
value.
When holding (press
twice), the value remains
unchanged when the
measuring tool is turned.
Selection of the second
function
Button for the counting
direction of the horizon-
tal circle: Clockwise
("R") or anticlockwise
("L")
Button for angle indica-
tion in gons ("G") or %
On/Off button for display
20
only for DGT 2
The DGT 2 can be connected with an electronic distance meas-
uring tool. Control takes place via secondary assignment of the
operating panel buttons.
Function setting
The user can perform the following settings:
Slope angle compensa-
tion
Vertical angle to 0
Automatic shutdown
Minimum angle indication *1", 5", 10"
Setting for communica-
tion baud rate
Selection of data record-
ing method
Collimation error correc-
tion
Buzzer
Selection of angle unit
Options marked with "*" are factory settings
Function 2
Distance measure-
ment
Repeating the horizon-
tal angle measurement
On/Off button for the
display and crosshair
lighting (3 seconds)
Changing the
SD/HD/VD indication
Recording the meas-
urement data
*OFF, ON
*90° (OFF), 0° (ON)
*OFF
ON (automatic shutdown after
20 minutes without button
press)
1200, 2400, 4800, *9600
*Interface (OFF), Memory (ON)
*OFF, ON
OFF, *ON
*DMS (OFF), Gon (ON)
1 609 92A 0LD • 23.10.14