Dometic WAECO CoolAir SP-900 Instrucciones De Instalación página 32

SP-900-Install.book Seite 32 Montag, 25. Januar 2010 4:53 16
Conventions in this manual
2 Conventions in this manual
2.1 General information on the installation manual
This installation manual contains the essential information and instruc-
tions for installing the air conditioner. The information is intended to be
read by the installation personnel of the air conditioner.
The following instructions are intended to help you use the installation
manual properly:
The installation manual is part of the scope of delivery and should be
stored carefully.
The installation manual provides you with important information on the
installation of the device and can also be used as a reference material
in the event of repairs.
The manufacturer assumes no liability for non-observance of this
installation manual. Any claims are excluded in this case.
The operating manual for the CoolAir SP-900 is included in the air condi-
tioner's scope of delivery.
2.2 Target group
The installation and configuration information in this manual is intended for
qualified installation personnel who are familiar with the guidelines and safety
precautions to be applied during the installation of lorry accessory parts.
2.3 Symbols and formats
You will come across certain symbols and formats in this documentation.
This is what they mean:
Format
Bold
➤
✓
The safety instruction indicates a danger from an electrical current
or voltage.
Failure to observe this instruction can cause injury or damage the device.
32
I
Meaning
Important information in
the text which must not be
misunderstood
Instruction text
Results of an action
e
Example
Set the switch (3) to the
COOLING symbol.
➤
Place the air conditioner on
a work surface with the
housing facing down.
✓ The system is now ready
for operation.
CoolAir