Graef MYtiny Manual De Instrucciones página 36

CUTTING OPERATION
WARNING!
Danger of injury !
The very sharp blade can cut off body parts. Especially your fingers and thumbs are at risk.
Do not reach into the space between the stop plate and blade as long as the stop plate has
●
not been completely closed.
Do not touch the blade with your fingers.
●
During cutting operation, the slide is moved. There is a risk of fingers being jammed if
●
handled incorrectly.
The unit is equipped with a switch-on safety device to prevent unauthorised use. This is located
above the adjustment of the cutting thickness in the form of a small safety button. When the
limit stop is closed, indicated by the lock symbol, the switch-on safety device is automatically
activated. For deactivation:
Press the safety button.
●
Turn the adjustment of the cutting thickness at the same time.
●
When the switch-on safety device is activated, the adjustment of the cutting thickness is
i
blocked and the ON/OFF switch has no function. The safety button is also the marker
for the set cutting thickness.
Place the slicing material on to the slide.
●
Always use the end-piece holder when possible.
●
Set the desired cutting thickness by turning the adjustment of the cutting thickness.
●
Press the ON/OFF switch for intermittent operation or slide the ON/OFF switch forwards
●
to position II for continuous operation.
36
1.
2.