Publicidad
Idiomas disponibles
Idiomas disponibles
Preparing the Lawn Before Using the Robotic
Mower
To prepare the lawn before using the robotic mower, do the following:
• Clear any obstructions and/or debris from your lawn.
• Before training your robotic mower, mow the lawn to a height of 51 mm (2 inches).
• Fill in any holes in the lawn that could stop the mower.
• To ease the setup process using the app, make a sketch of the mowing zone and all
obstacles, boundaries, transit paths, exclusion zones to make it easier to install the
charging station.
Starting and Charging the Mower
1. To start setting up the mower, turn the power
switch from the O
position.
2. Pull the mower into the charging station.
The mower comes with an approximately 30%
battery charge. Before you can start the setup
process using the mobile app, you need to charge
the mower to at least 85%.
3. After reaching the proper charge level, use the
mobile app to start the mower.
Setup: Preparing the Lawn Before Using the Robotic Mower
position
to the O
FF
Page 4–16
N
G430078
G430093
3448-238 C
Publicidad
