Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the Blades
Always mow with sharp blades. Sharp blades cut cleanly without tearing or shredding the
grass.
The blades are sharp; contacting the blades can result in serious personal injury.
Wear cut-resistant gloves and use care when replacing or cleaning the blades.
1. Turn the power switch to the O
2. Tip the mower over.
3. Rotate the blade disc until the holes on the
blade disc align with the screws.
4. Using a Phillips-head screwdriver, remove the
blade screws and blades.
Discard the blades and screws.
5. Clean any debris from cutting system.
6. Install the new blades using the screws.
7. Turn the mower over.
8. Turn the power switch to the O
9. Press the play (resume operation) button on
the control panel.
3448-238C
WARNING
position.
FF
position.
N
G484200
Page 6–8
Maintenance: Replacing the Blades
Publicidad
